Is a modular system scaffold with wedge fixing for all access
scaffold requirements. The wedge fixing of the ledgers and transoms
gives a simple and fast means of erecting access scaffolding
without loose parts.
Rigid 4 way fixing giving a positive location without movement.
Painted finish for maintenance free use.
We supply a full range of boards to suit 4'2" - 6'0"
- 8'0"
Conforms to all Health & Safety and British Standard requirements.
Standard 9'9" Effective scaffolding length 9'9" (2.972m)
Weight 38 ¾ lb (1 7.05 kg)
Overall length 10'1" (3.074m)
These standards form the vertical support or
uprights. They are made from standard scaffold tube and have
a head fitting for jointing them vertically.
A series of "V" pressings are the
means of attachment for the transom unit and the guard rail
ledger units.
The "V" pressings are the means of
attachment fot the transom unit and the guard rail ledger
units.
The internal or spigot part
of the head fitting increases the nominal length ot the standard
by 4" (102mm) This should be borne in mind when considering
clearances required for errection, storage or transportation.
K-Stage Standard
Length
Weight
Round Spigot
6'-6" (1.981m)
11.48kg
9'-9" (2.972m)
17.14kg
The Bar 8'0" Overall length 7'11" (2.414m) Weight
15lb (6.80kg). A length of 1½" x 1½"
x 3/8" (38mm x 38mm) angle iron with a dowel at both ends.
Used to connect stage brackets together. Not used with one Board
Bracket. For use in normal bay 8'0' (2.438m) Code KS43.
TIE BAR 6'0" Overall length 5'11"
(1.803m) Weight 111b (4.99kg) Code KS44.
TIE BAR 4'2" Overall length 4'1"
(1.245m) Weight 7lb (3.18kg) Code KS45.
K-Stage Transom
Centre of
Standards
O/All Length
Weight
2'-6" (0.762m)
0.712m
5.7kg
4'-2" (1.270m)
1.222m
9.66kg
K-Stage Ledger
(also used as Guardrail)
Centre of
Standards
O/All Length
Weight
6'-0" (1.829m)
0.780m
6.96kg
8'-0" (2.438m)
2.390m
8.86kg
Toe Board Bracket Overall Size 7" x 6" (178mm x 152mm
Weight ¼ Ib (0.73 kg).
Clamps on Kwikstage standard with a captive wedge fixing to
keep toe board in position.
Code: KS36 Weight: 0.78kg
End Toe Board Bracket Weight 3lb (1.3kg). Facilitates toe board
at the end of a scaffold
platform. Standard Steelstage or timber battens can be used.
Code: KS37
Batten Clamp Overall size 4'31/4" (1.296m).
This component is used to 'clamp down' a Kwikstage platform
(whether of steelstage or timber battens) to the scaffold to
prevent lifting in high winds. Details of other sizes available
on request.
Code: KS53
Weight: 9'/2/b (4.54kg)
Two Board Stage Bracket (as shown) Item No. 9019 Overall size 20" x 22"
(0.508m x 0.510m). Weight 14lb (6.35kg). As for three board
stage bracket, but platform provided is 18" (0.457m)
wide. TIE BARS MUST ALWAYS BE USED WITH 2 AND 3 BOARD STAGE
BRACKETS.
K-Stage Hop Up Bracket
Code
Length
Weight
KS53
1 Board
0.234m
2.34kg
KS34
2 Board
0.510m
5.82kg
KS33
3 Board
0.738m
9.54kg
Three Board Stage Bracket (Available in 2&3 Board Brackets) Item No. 9018 Overall size 29 1/16"
x 37" (0.738m x 0.940m). Weight
20lb (9.07kg). A cantilever transom with a bracket support to
provide
an additional platform on the side of the scaffold nearest the
building
or work. With steelstage or timber battens makes a platform
27"
(0.686m) wide.
Steelstage 8' nominal (2.438m) Actual length 7'11 1/4"
(2.419m).
Weight 38 1/4 Ib (17.04 kg) Code: KS49
Steelstage 6' nominal (1.829m) Actual length 5'1 1/4
(1.810m).
Weight 29 1/4 Ib (12.50 kg) Code: KS50
Steelstage 4'2" nominal (1.219m) Actual length 1 '11/4"
(1.251 m).
Weight 20 Ib (8.86 kg) Code: KS51
All Steelstage has a unique non-slip surface.
Adjustable Base Overall height 3'1 3/8 (939.8mm)
Weight 25lb (10.41 kg)
Adustment is by means of the screw thread giving
21" (546mm) of adjustment.
Weight: 5.10kg
Code: KS27
